A new type of high pressure oil pipe for automobile has been introduced

A new type of high pressure oil pipe which can be widely used in the field of heavy truck and construction machinery, has been developed successfully recently and obtained the national technical patent.。

Car fault emergency tips, fast collection!

What to do: stop the engine immediately when a leak is found, shut down the engine and check for leaks. If the tubing is broken, find a rubber or plastic sleeve matching the diameter of the tubing, and tie the two ends of the sleeve with wire to prevent oil leakage. If it is broken, wipe it clean and lather it. Then wrap a soapy cloth or tape around the broken pipe.

What is a car gas separator

With the continuous progress of engine technology, the working condition of the engine is getting stronger and stronger, and the oil steam caused by the crankcase ventilation system invents the intake system, making the carbon deposition of the engine a common problem. The oil and gas separator can solve such problems, so that the whole engine intake system including throttle, intake manifold, inlet, intake valve are kept dry and oil-free state, fundamentally eliminate the carbon deposition in the intake system. When an automobile engine is running, high-temperature and high-pressure gas burning in the cylinder during the power stroke (both the intake and exhaust doors are closed) will travel into the crankcase along the gap between the piston assembly and the cylinder wall. The engine exhaust that flows into the crankcase contains some steam and sulfur dioxide. Steam condenses to emulsify the oil, and sulfur dioxide can make the oil deteriorate, so the engine is equipped with a crankcase ventilation device to allow the exhaust gas to be discharged, and the oil and gas separator is installed in the crankcase ventilation device channel to separate the oil mist.