Causes of silicone tube discoloration under high temperature


Release time:

2024-01-19

Silicone tube is the flow of liquid, gas and other materials and coated carrier. Silicone rubber tube in the industry can be divided into "extrusion tube", "special-shaped tube". Widely used in modern industry, defense industry and daily necessities. What is the reason for the discoloration of the silicone tube at high temperature? Is the transparent silicone tube that needs to be contacted by food, and the yellowing phenomenon appears after 4 hours under the high temperature of 200 ℃.

Causes of silicone tube discoloration under high temperature

Silicone tube is the flow of liquid, gas and other materials and coated carrier. Silicone rubber tube in the industry can be divided into "extrusion tube", "special-shaped tube". Widely used in modern industry, defense industry and daily necessities. What is the reason for the discoloration of the silicone tube at high temperature? Is the transparent silicone tube that needs to be contacted by food, and the yellowing phenomenon appears after 4 hours under the high temperature of 200 ℃.
With silica gel high resistance to yellow vulcanizing agent C- 15, may the problem will be solved. General products have this requirement. To prevent secondary sulfur yellowing, be sure to use anti-yellowing catalyst. Both are indispensable, but these two things will make oil pressure production a little sticky, is to pay attention to things. According to the amount of silica gel plus 2-3 thousandths of hydrogen-containing silicone oil, high hydrogen-containing silicone oil can solve the yellowing problem, but the product may be a little brittle and sticky. A layer of silicone oil can be sprayed on the mold to solve the demoulding problem. In addition, platinum is the only bridge.
It is certainly a good idea to use anti-yellowing agents and anti-yellowing vulcanizing agents. However, it is also necessary to pay attention to whether the silicone tube you use is ideal, and too many internal release agents and zinc stearate cannot be added. Therefore, it is necessary to communicate with the supplier to see if there is already hydrogen-containing silicone oil to provide anti-yellowing effect. Powder is very important. If the iron content is too high, it will definitely turn yellow.
You can test it, compare it with ordinary vulcanizing agent (without anti-yellow agent) and vulcanizing agent with anti-yellow agent, and be careful not to add zinc stearate internal mold release agent. If it still doesn't work, it is recommended that you switch to another glue or use platinum vulcanizing agent. If the environment in the presence of sulfur or sulfur carrier (such as oven just two baked sulfur vulcanized products) will also cause silicone tube yellowing.

SAF Coolest v1.3.1.1 设置面板EYOSX-ATOE-HAAZE-ZSS

图片ALT信息: Aofa Pipes
违禁词: First, best, first-class, leading, unique, king, leader, leader, extreme,

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用